organization  terms shrink wrap packaging machine parts

Shangmei Profile
Jenqyi Profile
Service Center
Chinese Version


Frequently, flat film is used although folded film is still applied by a number of machines. The sealer will be able to process individual packs at a much higher rate through the ability to seal at an appropriately higher rate.
Cross seals involve the seal device traveling with the pack whilst side seal or overlap seal mechanisms allow for film to be sealed continuously.
These same machines may be applied to other bagging requirements on particular the mailing of magazines.
Machinery can be specifically customized to take advantage of any shrink wrap filmⳠparticular attributes to allow an appropriate pack to be achieved. One example of the foregoing is the modification of this process to allow for modified atmosphere packaging of food using barrier shrink film. When shrink wrap packaging machine parts
engineers set out to improve the shrink-wrap process, they went right to the source. Based on interviewing over 100 users of shrink-wrap machines, they identified six specific areas to improve. By addressing each of these with design improvements in their shrink-wrap machines, has increased the runtime between maintenance and simplified the set-up and changeover for new shrink wrap packaging machine parts
products.

ADVERTISEMENT

According to Jean-Louis Limousin, shrink wrap packaging machine parts
Leader, shrink wrap packaging machine parts Systems, one of the first areas to be addressed was belt tracking. The lack of consistent belt tension on existing machines dictated frequent adjustments to prevent down time. By using a system to guide the belts consistently and removing excess tension for all of the twelve rollers in the machine, they assure that all the belts are self-tracking and eliminate the adjustments.

Getting a maintenance-free cutting seal was the next area targeted for improvement. The accepted approach had been to use the same tooling for cutting and sealing. This required replacing the Teflon attached to the typical seal bar after about 8 to 10 hrs. shrink wrap packaging machine parts new Ever-Clean approach involves separating the cutting from the sealing portion and using a cutting blade made of spring steel and a clamp with rounded shrink wrap packaging machine parts.

 
Shang Mei Unt Packing Co.,Ltd.
No. 31, Shiangyun St., Shijr City, Taipei, Taiwan.
Tel: +886-2-2646-1992 Fax: +886-2-2646-1991
E-mail: shangmei@bizmail.com.tw URL: www.shangmei.com.tw
Jenq Yi Lan Enterprise Co., Ltd.
No.20, Lane 351,FU-TEH FIRST ROAD,HSI-CHIN CITY, TAIPEI COUNTY,TAIWAN
Tel:+886-2-2694-6098 Fax:+886-2-2694-0318
E-mail: jenqyi@bizmail.com.tw URL: www.jenqyi.com.tw

packing machine - shrink wrap machine - BOPP film packing machine - packing materials - automatic triangle packing machine - terms - sitemap - home